Maytag Services JDS9865BD* Specifications download pdf (Page 27)

To avoid risk of electrical shock, personal injury or

death; disconnect power and gas to range before

servicing, unless testing requires power and/or gas.

Disassembly Procedures

Cooling Fan Replacement

1. Remove power from unit.

2. Remove range from installation position, see

"Removing and Replacing Range" procedure.

3. Remove back panel, see "Back Panel Removal"

procedure.

4. Label and disconnect wire terminals from cooling fan.

5. Remove screws securing fan to range chassis.

6. Reverse procedure to reinstall cooling fan.

Hidden Bake Element Replacement

(Select Models)

1. Remove power from unit.

2. Open oven door and remove rack(s).

3. Remove screws securing hidden bake element cover.

4. Remove hidden bake element cover by sliding cover

toward the rear of the oven cavity while lifting up on

front of cover.

5. Remove screws securing bake element to rear of

cavity wall.

6. Pull element forward to allow for labeling and

disconnection of wire terminals.

7. Remove element support clips.

8. Reverse procedure to reinstall bake element.

Bake Element Replacement (Select Models)

1. Remove power from unit.

2. Open oven door and remove rack(s).

3. Remove screws securing bake element to rear of

cavity wall.

4. Pull element forward to allow for labeling and

disconnection of wire terminals.

5. Remove element support clips.

6. Reverse procedure to reinstall bake element.

Broil Element Replacement

1. Remove power from unit.

2. Open oven door and remove racks.

3. Remove screws securing broil element to top and

rear of oven cavity.

4. Pull broil element forward to allow disconnection of

wiring from terminals.

5. Reverse procedure to reinstall broil element.

Downdraft Blower Motor Removal

(Select Models)

1. Remove power from unit.

2. Remove bottom access panel, see "Bottom Access

Panel Removal" procedure.

3. Disconnect ducting to allow for downdraft blower

motor removal.

4. Label and disconnect wire terminals.

5. Remove screws securing motor assembly.

6. Reverse procedure to reinstall downdraft blower

motor (select models).

Downdraft

blower motor

assembly

Convection Motor Removal

1. Remove power from unit.

2. Open oven door and remove rack(s).

3. Remove screws securing convection element and fan

cover (on rear wall of oven cavity).

4. Remove screw securing fan blade to fan motor shaft.

5. Remove screws securing fan motor to cavity wall.

6. Slide motor into oven cavity.

7. Label and disconnect wire terminals from motor.

8. Reverse procedure to reinstall convection motor.

Convection Element Replacement

1. Remove power from unit.

2. Open oven door and remove rack(s).

3. Remove screws securing convection element and fan

cover (on rear wall of oven cavity).

4. Remove screw securing convection element to rear

oven cavity wall.

5. Label and disconnect wire terminals from element.

6. Reverse procedure to reinstall convection element.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 72 73

Comments to this Manuals

No comments

Maytag Services JDS9865BD* Specifications Page 27

Comments to this Manuals